Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Engine> Total advance, initial, mechanical and vaccum advance Can anyone break it down Please
User Name
Password
lost password?   |   register now

Thread: Total advance, initial, mechanical and vaccum advance Can anyone break it down Please Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
09-07-2007 07:25 PM
ernkazern
Total advance

Techinspector1's explanation sounds pretty good. I may have confused you by calling centrifugal advance mechanical advance. Just different East coast/West coast terminology I guess....lol.
09-07-2007 05:42 PM
techinspector1 You didn't say what motor, but we'll assume a small block Chevy. You would want somewhere between 32 and 36 degrees of initial + centrifugal advance, depending on the combustion chamber size and shape.

Initial is what you dial in at the crank with your timing light and would be somewhere between 4 degrees and 20 degrees. Most guys use around 12 at the crank initial advance. This is with the vacuum cannister hose disconnected at the cannister and a golf tee stuck in the hose.

Centrifugal would be what the distributor weights would swing out to add to the initial advance and would be in the neighborhood of 20 to 26 degrees. You can buy inexpensive weights and springs to tailor this anywhere you want it. To bulletproof it, take it to a shop that has a distributor machine and have them tell you the exact advance you've put in as well as where the total advance comes in in crankshaft rpm's.

So, to get, for instance, 36 degrees initial and centrifugal, you might dial in 12 degrees initial at the crank and put 24 degrees centrifugal advance into the distributor. For best performance in a hot street motor, you might want the full advance of 36 degrees all in by 2,600 to 3,200 rpm's, depending on the weight of the car and other factors.

Vacuum advance is added to this at cruise speeds for additional fuel mileage and might be another 10 to 15 degrees for a total initial, centrifugal and vacuum of around 50 degrees.

Oops, I didn't see that you had two threads going on this same subject. Hope I didn't step on anybody.
09-07-2007 05:31 PM
Brawler
Total advance, initial, mechanical and vaccum advance Can anyone break it down Please

This is all i know and i dont really understand what it means Total advance for our purposes is initial advance plus mechanical advance. Disregard vacuum advance for now.
Just want to know how to adjust properly

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 10:17 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.