Hot Rod Forum banner

1950 chevy frame swap

3K views 2 replies 3 participants last post by  Maverick 
#1 ·
I have a 1950 chevy truck (3100, five window) with a broken/ repaired frame. It was a farm truck so it's a little rough. The body is in good shape but the frame is done. I've heared about the an S-10 frame swap and would appreciate any advise or recomendations.
 
#2 ·
There was another thread a couple of weeks ago on the same subject. I can't recall the title of the thread right now, but this was the link that I supplied to that one also. It deals with putting a '52 Suburban body onto a s-10 frame. Check it out, it might help you get some ideas brewing.


<a href="http://www.commerce.usask.ca/staff/hipkin/burb/frameswap.html" target="_blank">http://www.commerce.usask.ca/staff/hipkin/burb/frameswap.html</a>

[ December 23, 2002: Message edited by: crshrmn3 ]</p>
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top