|10-26-2007 10:22 PM|
|kwopper07||if you have a extra peg for the throttle put it in the bottom hole on the carb lever but face it inside twords the spacer.the spring will line up with the bottom spring hole on the junky bracket.i got the same one for the time being|
|10-26-2007 07:32 PM|
Edelbrock users: throttle return spring pics?
Like it says, I'm looking for pics of how you have your's setup.
I've been looking at alot of brackets that bolt to the intake, but since I've recently installed a 1 inch spacer the geometry would be off with them. So I've modified one of those "junky spectre" brackets to my liking. But now I'm looking for ideas of return spring setups