|04-01-2008 05:45 PM|
Did you get installation directions with the manifold? The Edelbrock instructions (they are online) tell you to not use the end gaskets, and seal with a bead of RTV instead.
They also tell you which main gaskets to use, and a couple types/brands to avoid. The suggested gasket is a little thicker, and has a silicone bead around the water jackets.
|04-01-2008 03:15 PM|
Thanks, Just wanted to be sure about it.
|04-01-2008 07:38 AM|
|darom||Yes, I always use the gasket maker (Permatex Black RTV). It seals well and never gives me issues later.|
|04-01-2008 04:54 AM|
Performer eps manifold....
... The manifold I have , but have no gaskets, Looked up the manifold and the gasket suggested has just 2 peices, None for the front back end of the manifold, I guesss just seal that up with gasket sealer??