|07-15-2008 06:42 AM|
I was told by a good source that it's better to wait overnight when
clearing single stage colors.
Single stage colors off gass a long time.
When I cleared my car, that I used a metallic urethane on,
I found if I didn't wait a good 3 hrs, sometimes the metallic would
be disturbed by the clear and make the color look different,
looking like stripes.
Waiting longer, up to 24 hrs is best.
|07-14-2008 09:45 PM|
shoot clear as if it was your next color coat, same flash time. but be sure to read your can instructions or get data sheet. i dont know what brand u r using. i would let it get just about dry to the touch but still a little sticky not stringy just enuf 2 leave finger print. u want to be able 2 lightly drag your finger across paint without pulling or ripping.do it on taped area not pannel. wet sand & buff next day. but get that data sheet your ae could tell u different
|07-14-2008 12:09 PM|
Clearing AE with Universal urethaine clear
I just finished wet sanding my previous AE (dust and a few insects). I will be reshooting the AE.
1. How long do I should I wait to shoot the urethaine clear?
2. How long would I need to wait to wetsand and polish the clear?