|07-15-2008 07:43 PM|
|CNC BLOCKS NE||
|07-15-2008 05:40 PM|
The 1034's .042 thick,1010 are.031 thick. I need .060 to drop some compression.
|07-15-2008 05:34 PM|
|CNC BLOCKS NE||1010 Felpro is just for aluminum heads.|
|07-15-2008 02:08 PM|
Do they make those gaskets in a .o6o thickness?
|07-14-2008 07:28 PM|
|barnym17||You need to use the correct gaskets to prevent brinneling the head.Fel-Pro 1034 comes to mind someone correct me if my memory is wrong.|
|07-14-2008 06:38 PM|
I have recently purchased my first set of aluminum heads for my street car, I will be running about 11.5:1 compression. I was told I had to run a special set of gaskets. Do I really have to have a special set or can I get buy with regular head gaskets like the some rubber over metal or somthing.