Hot Rod Forum banner

2 1/2 Rams horns.

2K views 6 replies 6 participants last post by  DoubleVision 
#1 ·
I had asked in another thread an did not receive a reply so I will try again. Are the 135 degree dump rams horns available in 2 1/2 inch discharge. I have a pair of 2" dump 135 degree dump and I understand that the straight dump ramshorns were on some corvettes in the 2 1/2 inch discharge. Anyone know!
 
#4 ·
The straight dump rams horns are also available as a standard replacement part from Dorman. I think you can get them at any PartsAmerica.
Some GM dealers also still sell them (Gilbert Chevrolet used to sell them over the web), but I think they are old stock.

Link to the dorman manifold
http://www.midwayautosupply.com/m-114-dorman-exhaust-manifold-kits.aspx

Based on the pictures, the 2 1/2" are straight dump, while the smaller ones from the trucks are angled dump.

Bruce
 
#6 ·
Thanks for the reply. I thought that the 2 1/2" were all straight dumps. I need the angle dump to clear the Jaguar IFS rack and pinion on my 49 F-1. I currently have the 2 " angle dump fitted up but would go out in search of a 2 1/2" angle dump if such a manifold existed.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top