|08-13-2008 06:23 AM|
|speedydeedy||Thanks,I started with a body ,radiator and shell and a front axle. I built my own frame,chopped my own top and am in the process of narrowing my 9" Ford rear end.|
|08-11-2008 07:56 PM|
Checked out the pics of your 31, lookin good. Looks like you started out with a lot less than I did. When I bought mine it was complete, less engine and trans. Keep pluggin away, iy'll get done.
|08-11-2008 06:01 PM|
|speedydeedy||I like it a lot. Can't wait till my 31 is drivable.|
|08-10-2008 08:08 PM|
|Old Hemi||The pictures do not do it justice. It looks even better from the inside looking out. And yes he would't put a hemi in it. But I am putting a 55 270/4spd. OD in my 31 Tudor, 4' dropped front and 47 open drive Banjo.|
|08-09-2008 04:51 PM|
|boomer||Centerline, you sound like my brother (old hemi), he tells me I should put an early hemi in it. He's been a Mopar hemi nut for as long as I've been a Ford nut. Neither one of us care for belly button power.|
|08-08-2008 10:22 PM|
|08-08-2008 09:57 PM|
Nice Coupe.........Centerline..are you feeling ok?...you did notice that the sparkplugs cont go through the valve pans didnt you?
|08-07-2008 09:36 PM|
Hot damn! A Ford in a Ford. What a novel idea!
|08-07-2008 06:07 PM|
|boomer||I don't plan on chopping the top. I have a 4" dropped axle to replace the 2 1/2" that's in it now. And for the rear I plan to do some work on the spring to drop it about 2". New tires are in the near future also. I kinda like stock height tops unless it is channeled with no fenders.|
|08-07-2008 06:46 AM|
Looks real nice. We are going to look at a 31 chopped coupe this morning. If ny friend does not buy it, I will
I don't need another car, but it's too cool to pass up.
That 32 shell looks good too ...and the wires
|08-07-2008 06:22 AM|
|speedydeedy||Very nice.I chopped mine 3 1/2" . Yours would look good dropped about 3" and chopped about 3 1/2" . Any plans?|
|08-04-2008 07:55 AM|
|Frisco||Very nice coupe!|
|08-03-2008 08:36 AM|
The K motor is long gone, the trans got taken apart to repair the one in my 56 T-Bird after I broke it, the 9" housing is on a rack here by the shop and the 3.56 gears are also in my 56 Bird.
Adding some pics. Hope they turn out larger.
|08-03-2008 05:56 AM|
|speedydeedy||I like it but wish the pics were bigger. I am building a 31 coupe.|
|08-02-2008 01:28 PM|
|327NUT||So obviously you sold the K-motor, trans. and 9 inch during that time?|
|This thread has more than 15 replies. Click here to review the whole thread.|