|09-20-2008 09:39 AM|
Sometimes it seems as though the alleged advertising is trivial nit-picking.
If you are not a paid/compensated endorser, agent, representative or affiliate of any known product that you may or may not mention, known or unknown, please included such information on all of your posts...
J M O
|09-19-2008 09:53 PM|
use the 882's.
vortecs also require a vortec intake, vortec rockers, and vortec valve covers.
|09-19-2008 02:20 PM|
|curtis73||No problem, Jmark. I know not to sell which is why I didn't list a price or specifics|
|09-19-2008 02:19 PM|
You stated some goals of miliage and reliability.
The goal of achieving a low HP engine in favor of low speed Torque will make this an enjoyable engine package.
I myself would essentially build a Truck engine.
The 193 heads are an excellent street performance head that make UNREAL low speed throttle response.
A small bore 2 BBL intake off of a 283 would also work very well on the street.
I personally would use a stock 305 cam for the low base circle & tight overlap.
This will all make the engine run out of gas in the mid 4,000 range but will more than make up for any discrepentancy in high revs with OUTSTANDING low speed response, high vacum, & fuel effeciency.
|09-19-2008 01:42 PM|
This thread has moved very close to advertising. Please keep any further "offers" to the "Private message" feature. Thanks guys!
|09-19-2008 01:36 PM|
|TexasTechX1||How much do you want for them? Wait... better ask tis first, how extensivly are they ported? gasket match and bowl shaping? or bigger?!?! I have a comp 12-250-3 that might go with them... but it would make that engine scream!|
|09-18-2008 11:15 PM|
I have bought used Vortec heads for $300 a pair and got lucky. I also bought some for $350 and they needed a $250 valve job before using and it killed the deal. I recently lucked on a complete vortec motor for $50 that I don't think had 10k on it before it spun a rod bearing. Buying used is always a crap shoot, and like you said, they're only $580 new.
|09-18-2008 08:38 PM|
Makes your dream wheel calculations look reasonable.
|09-18-2008 07:51 PM|
I wish I could get a set of vortecs, I even have a really nice intake for it I got a long time ago. I guess I could sell the Offy intake, 882s and 193s and put that money into some vortecs. how much do ya'll think I could get for both sets of heads and the offy intake? How much are vorte heads? I know new they are around $580 a pair assembled.
Could the stock 193 valves work with the 882 heads?
|09-18-2008 03:17 PM|
|09-18-2008 03:15 PM|
"Tie a rope to the 193s and put them in your boat"
Curtis, I wish you'd stop hemmin' and hawin' around when you're trying to make a point.
|09-18-2008 03:08 PM|
What I would honestly do? I'd sell both sets and apply the money toward a set of Vortecs. The chambers are so much more efficient than both of those that any money you spend (on the heads or the intake to match it) would probably be recouped over a year's worth of driving.
The 193s are really crippling. Sure, they're fine for low RPM torque builds (I have to say that so people won't be shooting arrows at me ) but they are very poor-flowing heads. They hit a wall at about 4000 RPMs and 250 hp. The cam you listed will be way too much for those heads. The heads will shine from 500-3500 RPMs and the cam won't start to make decent power until 2500. The heads will be done before the cam can even do its thing. I think that 300 hp is VERY optimistic with 193 heads. I'd say 225 max.
The 882s are the better choice of the two. The large chambers will require small domes to get in the 9's compression and domes kill flame front speeds. That means more ignition lead and less detonation tolerance. You might find yourself needing premium fuel for not much benefit. These heads will be an OK match with the cam, but they will start losing steam around 5000. The cam will be good to about 5800, so you'll be neutering some of the cam's ability but like you said, you're not worried about max power.
The Vortecs on the other hand will give you your higher compression, but the super-efficient chambers will let you run 87 octane with much less ignition lead. That translates to higher combustion efficiency and should translate to more fuel efficiency.
If you want to use what you have, go with the 882s. Try to get your compression where you want it using head gasket thickness, not domes. Tie a rope to the 193s and put them in your boat
|09-18-2008 02:57 PM|
|techinspector1||I'd be more inclined to use the lower c.r. if you don't plan to optimize the squish by either cutting the decks or changing pistons. With a wide squish, you may encounter detonation with the higher c.r. on pump gas. I'm not sayin' it WILL ping, just that it will be more likely to.|
|09-18-2008 02:48 PM|
I guess the center bolt valve covers are just a personal, cosmetic thing. I've seen the adapters for about 100 bucks or so.
It's really a matter of flow over cost/work. the 193 aren't perf heads but they will do the job and with very little work and cost to make them run but the 882 can be used as a decent perf head, atleast more than the 193s, but I would have to spend a few more bucks and a little more work.
Thanks for the suggestion though!
|09-18-2008 02:29 PM|
|TorkMonster400||If the only reason you don't like the the 193's is centerbolt heads they make adapters for using regular valve covers, the only problem being you can run close to your brake booster.|
|This thread has more than 15 replies. Click here to review the whole thread.|