|10-28-2008 02:48 AM|
|10-28-2008 02:22 AM|
|Triaged||I say dual 350 TBI's...Not because I think it will work any better...I just want to see it done and think it would look cool. I doubt it would end up cheaper in the end.|
|10-26-2008 02:22 AM|
I am a "fan" of fuel injection. Done right engines perform better, and last a lot longer. Any type of fuel injection that is controllable is best. You also do not have to deal with any carb jetting, or adjustments during 'weather' changes.
For "looks" there is nothing like dual carbs sitting on an intake, especially on top of a 'blower'. IMO
|10-25-2008 11:06 PM|
454 tbi or dual tbi on dual 4bbl carb intake
With a EBL ECM computer from dynamic EFI (http://www.dynamicefi.com/InjectorDriving.php Would it be better to run a 454 2" tbi or run a dual 4bbl carb intake and mount 2 stock 350 tbis on it? What all would i have to do to run the dual? if i were making around 390 crank hp, which would be a better choice for power?
Link for the ecm its self: http://www.dynamicefi.com/EBL_Flash.php