|01-16-2009 01:48 AM|
So the body lines are our friend and can be used to make colors match where they don't want to, Even the same paint from the same can will appear different from paint session to paint session with all the variables involved, like gun distance,angle,adjustment.pressure,reducer,air temperature,humidity,day of the week,time of the year,,the list goes on [/end drama]
Not one to leave this project undone,
The foam tape was moved to the top bodyline on this bumper so the upper most section stays untouched and keeps the factory orange peel and color/texture (appearance) as if nothing ever happened (pre-collision condition) effect when one walks up to the trunk...
When polishing along the tape line the foam is removed and a couple passes with the buffer clean any " stray spray"
|01-07-2009 08:44 AM|
|01-06-2009 03:02 AM|
Your very welcome... here's another read on blends
|01-06-2009 02:56 AM|
|ScotY||That's really cool! Thanks for the thread, Milo!|
|01-05-2009 10:53 AM|
Here's this week's projects masked for primer success with second generation (used) foam tape as well as the old style with paper flipped over it'self in an effort to not have hard tape edges in the primer...
hmmm,, nice,.. there is a body line in the middle of that bumper and the damage is all on the bottom half
You don't want primer overspray if your gonna be blending..
A system where multiple projects get primed at the same time gets the most from the materials..
|12-31-2008 08:46 PM|
When the base color is settled down it's ready to clear as usual meaning slam the clear on there as if the foam tape wasn't an issue. The force of the air is needed pound the clear into the corner of the foam...tough to put into words so I brought pics.
*** 8 inches ,regular pressure, 4 fast passes =2 coats-->( 15 min between coats)
Then to pull the masking after 20 minutes let set...
We do owe thanks to the fly who gave his life so this thread might happen..
The seagull was from a trip to the beach while the clear dried
|12-31-2008 08:28 PM|
It needs to have a bodyline to work the best,
The tire is still on the rim but unbeaded...only the first 1/4 inch got paint and clear...
|12-31-2008 08:24 PM|
You can see it used for primer by the plastic , as well as in this wheel fix from a tire machine accident..
|12-31-2008 08:19 PM|
It's product name is Door Appeture Foam Tape from 3m..
It is mostly used for masking door jambs, around the trunk,gas door , and hood etc..
It comes in a couple sizes and is coated with a adhesive for just a quarter of it's circumference so the curve works to soften how material hits. I marked the adhesive part so it woud show in the pic.
I've found the 1/2 inch to be the best of the sizes to do jambs as well as blends and other tricks/saves.
It can be reused a couple times so save the used stuff in a separate box.
It is great for masking when spot priming so you don't get that hard edge on primer..
|12-31-2008 12:48 AM|
The foam tape is awesome...up here its about 65 bucks per box. Its low tack, Ive never had it leave marks or residue, and it works pretty slick!
Love seeing peoples apporaches. Being able to do it is one thing, but being able to fix it is another beast of its own, eh?
|12-30-2008 07:37 PM|
HI,that foam tape looks trick. is it easy to use?easy to pull off? hi tack or low tack? back when i was painting boats and airplanes,i used to use the 3m blue tape ,2 inch wide. but i would only press down about 1/2 inch,and let the other 1- 1/2 inch stand up .it sorta worked (as far as no tape line) but that foam tape looks good. where do you buy it? and whats the cost?
|12-30-2008 06:17 PM|
Knowing there will be a reaction from the disturbed clear getting more base color added it is only reduced 1 to 1 and "dusted" on with higher air pressure to get it through the gun and anticipated extended time between coats.
The lowwer foam tape is removed to get a gental sanding in there to flaten the wrinkels. then replaced so no sand dust gets hung up in the foam tape and then more base is teased on with 45 minutes to an hour between light layers of base.
A look at the white on the paper shows progress.
The foam tape allows the air to swirl and bounce around preventing a "hard' tape line edge.
The second pic has been adjusted to show the expected reaction where there was sanding into the clear where the fly was.
Flow the air and then barely tap in the trigger...
|12-30-2008 08:40 AM|
With hopes that the fly would sand out to no avail the area has been flat sanded with 1000 grit and is ready for masking.
Using "American Brand" 3/4 inch masking tape set back from the crown lines leaving just enough room for the soft edge foam tape..
|12-30-2008 07:33 AM|
I'm still learning to make things that bug me my friend, hence grabbed the camera and thought to turn the fix into a project thread..
As in the beginning the blend of clear went over the body line from the damage and stropped at the next body line where you see the tape..
The fix will be simalar
Say hello to our little friend from 3M
|12-30-2008 07:10 AM|
|Kevin45||Not as bad as a moth that lands on the side of a freshly painted door. And that was in Acrylic Enamel They can walk quite a ways before they croak|
|This thread has more than 15 replies. Click here to review the whole thread.|