|01-06-2009 01:07 AM|
I say put a cam AND nitrous injection on it and then start saving up for some new rods and an oil pan. Just make sure you have a good time doing it..
If ya wanna play, ya gotta pay..
|01-05-2009 09:18 PM|
Like literally push one through? with just your fingers? That'd be a neat trick.
FWIW while I always do my own engine work you can usually find a mechanic to do a cam install if you look hard enough. I would recomend going with the ISKY 268mega cam at MAX though. Something around 252º would be better for an otherwise stock car but that cam is somewhat liveable with a 283 and will work with "z28" springs.
|01-05-2009 08:43 PM|
|galaxieguy3||Thats some pretty sound advice Tech. lol|
|01-05-2009 08:26 PM|
|techinspector1||Don't do anything. You could push a rod through your oil pan.|
|01-05-2009 05:57 PM|
i have a old 283 out of an 67 Malibu and it runs fine i just want to put a cam in it but im afraid ill push a rod through my oil pan what do i do???