|03-30-2015 12:37 PM|
Atlanta HotRod contact
I have a 1937 Ford roadster I bought from a person in Fla. He did a nice job puting it together and its 60-70% complete. T he drivetrain is complete and the body has been epoxy primed at this point. However, while it was being transported, the driver rear fender was severely damaged. While I can repair it, I'd rather replace it. I was told its an Atlanta Hotrod body and I'm having a difficult time contacting the company. Any ideas?
|01-08-2009 07:47 AM|
Unless old age and memory loss has fallen on me; the last year that Ford manufactured a roadster was in 1936.
Anything else (replica fiberglass or whatever) is either a "dream/concept vehicle" or a convertible (roll up windows in the doors).
I know, I'm a little picky about correct wording.
|01-07-2009 09:18 AM|
Could these problems be noted in the Company Review Form here on HR.COM ? Just asking.
Time 10:19 am
|01-06-2009 08:39 PM|
|woodz428||Having dealt with some of the scum of the industry over the last 10 years, I would advise against ANY company that has a website and NO contact info. They may not even make the bodies, there are enough dirtballs making bodies from worn out molds that have already run their name into the ground that they need new names to market under. The lead page on this site references how name change is only superficial. Also BEWARE of any company that wants you to make an appointment to see their business..red flag...warning Will Robinson warning. Contact info is worthless, though, if they won't answer their phones when it turns to crap, as it often does. There are enough "reputable" companies to deal with...as pointed out...you get what you pay for. One of these reputable companies, by the way, IS NOT DaVicki LTD. (enterprises,inc. or any other addition). They are some of the scum...BEWARE. Those '37 bodies could be from them, they use a lot of front people to sell their trash, they have the molds and are willing to make crappy bodies for profit.|
|01-06-2009 05:16 PM|
RE 37 Atlanta hotrod
you can go to www.atlantahotrods.com and in to their contact us, they leave no # number to contact them. I own a roadster from them and will say this Remember you get what you pay for Always. their body is not good quality and i speak with 30 plus years in the fiberglass industry. and will require a bit of work to make this work, they have a person in Atlanta who sells for them on e bay his name is cory an is legitmate. the car I bought was real rough and full of Air bubbles from sloppy lamination work, good luck with contacting them. if intrested in a 37 contact OZE rods or evoulotions and get a good body.
|08-15-2008 02:03 PM|
Atlanta Hot rods
Yes I know where they are located. They are located just north of Atlanta. I bought a 1937 roadster from them and built a frame and rolling chassis for it. I have since run out or funds becaus of other projects and ****....****.
|05-16-2007 10:39 AM|
Can't find an address or phone number for them - that might be something to consider if you are serious about buying from them. Here a link to their website and you can email them from there:
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
|05-15-2007 08:18 PM|
1937 Ford Roadster Body
Does anyone know where Atlanta Hotrods is located in Winder GA. They are supose to make a nice 1937 ford Body.