|02-04-2009 08:47 PM|
Here are the plans, I started a guide that should be done in a week or two.
|01-30-2009 02:13 PM|
oh , cool..
i want a sandblaster, but without a welder or anything i cant build one.. i just want a cad program to draw stuff on
EDIT: i just downloaded it and watching the tutorial points.. it looks awesome!
i'm ready to try it
|01-30-2009 01:16 PM|
it's a free download.
if you wish to install it, I can email you the actual file it produces, then you can rotate it around or make changes as you wish. Installing sketchup is just like Google Earth.
|01-30-2009 10:25 AM|
|MrPhotographer06||just curious, what CAD are you using?|
|01-28-2009 10:35 PM|
I'm chugging along with my home made blast cabinet. I did purchase the TP plans for a few bucks but that wasn't good enough Their width was 34" and I wanted more. So, I busted out the old math book, did some trigonometry, adjusted the hopper along with angles and drafted it up in CAD. The attached picture (hopefully) shows the initial drawing. If anyone is interested, I will document the whole construction and post it on my website. I promise you the measurements are spot on and if anyone want to build the same one, your cabinet will *fit* together just fine.