Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic -- Hot Rod Forum

Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Interior> How to cover these door pods?
User Name
lost password?   |   register now

Thread: How to cover these door pods? Reply to Thread
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Please select your insurance company (Optional)


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Additional Options
Miscellaneous Options

Topic Review (Newest First)
03-13-2009 10:17 PM
dbinnc Thanks!
03-13-2009 04:50 PM
kirkschopped67 dbinnc

I seen the photos of the door panel that you finished. I thought you did a great job.

03-01-2009 02:35 PM
Originally Posted by dbinnc
one more question. On my existing covered one, can I cover over it or should I remove the old fabric first?
Congratulations! You could go over it if the fabric is thin enough, but you take the risk of it looking different than the other one. I would remove the old fabric first.
03-01-2009 02:15 PM
Wantabe Great work and glade to see you stayed with it. Some times you just need to walk away and come back. Has worked for me before, many times. Looks awesome.....
03-01-2009 12:56 PM
esahlin That looks really good. Nice job. The bowtie came out really nice!!
03-01-2009 11:37 AM
dbinnc one more question. On my existing covered one, can I cover over it or should I remove the old fabric first?
03-01-2009 11:29 AM
dbinnc well, finally got'er done. The part below the big speaker hole was the worst. I pulled and pulled and just when I thought I couldn't pull anymore, I pulled some more. My thumbs were sore. It didn't come out 100% but maybe 99%. I even got brave and used some volara for the GM symbol.

Dan, I can't thank you enough. There is just no decent info on the web for auto upholstery like there is for everything else. I read a post that said you were leaving, sure glad u didn't.

02-28-2009 02:40 PM
DanTwoLakes Pull the fabric as hard as you can side to side in both directions and staple it or glue it on the back of the pod. Then you can pull the fabric top to bottom. You need to pull it as tight as you can get it, and you should be able to pull out all the wrinkles.
02-28-2009 02:12 PM
dbinnc ok, I am getting frustrated again. I started with the speaker holes and let it dry, when I try to wrap it around, I still get that big overlap.

02-28-2009 07:04 AM
DanTwoLakes Be careful with the tweed that you don't spray too much glue on it, or it can soak through. Stay back 12" when you're spraying.
Performance spray glue has 3 different spray patterns. Use no more than the medium pattern. Good luck.
02-27-2009 07:20 PM
dbinnc it is a faux suede and it doesn't stretch,but I got some tweed and will be replacing it with that. Also got some better high temp glue.

thanks for the help. gonna try this wknd.

02-27-2009 06:01 PM
DanTwoLakes 3-M 90 (super trim adhesive) is fine, but don't use 77 or 74, they will not work, cuz they're not high temp adhesives.

Yes, if you do it like I said, you should be able to get it smooth. It looks like the fabric is some kind of imitation suede. Does it stretch? If not, it will not be as easy to get the wrinkles out, but it still can be done.
02-27-2009 02:57 PM
dbinnc I used 3M 77 or 90, can't recall right now.

So when I get down to the bottom where it is curved, i shouldn't have any creases if I do it the way you suggest?

02-27-2009 02:26 PM
DanTwoLakes What did you use to glue the fabric down with? You need to do this in stages, not all at once. Basically, you need to start at the large and small speaker openings. Attach the fabric to the pod 1" completely around the perimeter of the large opening and up to the small speaker opening with High Heat Resistant contact adhesive. Don't cut out the openings until you are done. Once that is solid and the glue is dry, you can pull the rest of the fabric out and away from that point. The low spots you will have to glue to hold the fabric in place, but the rest doesn't have to be glued on the front, just on the back. If you can staple into the back side, that would be easier than gluing.
02-27-2009 12:49 PM
How to cover these door pods?

Ok, I tried to cover this, first time doing something like this.

It looks ok, but if you look underneath I had to cut out the ripples and patch together. How do I cover this so as to not get an ripples, folds, creases or anything? I get so frustrated.
I have another one to do and also would like to redo this one.


Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -6. The time now is 12:33 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999 - 2012. All Rights Reserved.