Hot Rod Forum banner

Camaro Tip

698 views 0 replies 1 participant last post by  metalmeltr 
#1 ·
Here is a tip for moving around camaros that have had the subframe removed. Take a rocker panel clamp, seperate the two halves and bolt them on where the subframe bolted to. Take a 2X6 and clamp it to the clamp halves. Then you can put you floor jack under the 2X6 and move it around. If you have to move it over an area where the jack can't go the shell of the viehicle is lighter than you may expect and you may be able to move it by hand.
This isn't just for camaros it works with most viecals built with a subframe.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top