Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Engine> intermitent high idle
User Name
Password
lost password?   |   register now

Thread: intermitent high idle Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
08-11-2009 04:53 AM
cobalt327
Quote:
Originally Posted by 85_Olds
i think ill spend the weekend playing with it to see if i can see anything visualy sticking or binding.
Good idea. You mentioned modifying the choke- You might start there when looking for anything causing the throttle blades to stick open some, the fast idle cam/linkage could be the culprit here.

I would have seen where the curb idle stop on the linkage was at, when the engine was in "fast idle mode", if the stop was OFF of the curb idle screw, you would know for certain there was something holding the throttle open some small amount.
08-10-2009 10:17 PM
85_Olds
Quote:
Originally Posted by Torque454
Leaking throttle shaft bores can make this happen. Also if there is some binding somewhere or a weak spring (the one that closes the secondaries) it might not be closing the secondaries all the way. Ive had that happen on some old weber 32/36 2 barrels.
I dont think its the throttle shafts; i installed throttle shaft bushings, and made sure that there was no play. i customized the primarys and secondarys to open to a full 90deg. and played with it a while to make sure that it worked well. i did a fairly thurough job of rebuilding it. even boiled it in white vinigar and blew out all the passages with carb cleaner and comp. air! i think ill spend the weekend playing with it to see if i can see anything visualy sticking or binding.
08-10-2009 01:37 PM
Torque454 Leaking throttle shaft bores can make this happen. Also if there is some binding somewhere or a weak spring (the one that closes the secondaries) it might not be closing the secondaries all the way. Ive had that happen on some old weber 32/36 2 barrels.
08-09-2009 03:56 PM
85_Olds
Quote:
Originally Posted by ericnova72
It would help if we knew what brand, size, and type of carb you have.
its the stock q-jet (i believe it is an M4MC and aprox 750 cfm) installed idle air bypass in the base plate at 0.63", also has a 4" manafold to carb spacer. i made sure that the throtle cable and kickdown cable move freely-they clear nicely and the cables themselfs move easily. and i converted it from a thermostatic choke to electronic choke. the idle adjust screwes are backed out aprox. 3 1/4 turns, and the apt screw is somewhere around 3 and 1/4-did alot of hiar turns so i dont know exactly how far it is backed out.
08-09-2009 02:09 AM
ericnova72 It would help if we knew what brand, size, and type of carb you have.
08-09-2009 01:13 AM
elcaminodragster
Quote:
Originally Posted by 85_Olds
Ok reak quick heres the deal: new intake manafold-car ran ok, but problems starting, rebuilt the carb, car starts fing, but idles high only after it goes to wot. i can drive all day at heavy part throttle and it stays at a good idle, but as soon as i push it to wot the idle jumps way up, and its like i can feel it in the gas pedal when i floor it-its smooth all the way through till right before it hits the floor board. its like pushing a toothpick through a watermellon. but only the first time, after i do it, the idle jumps and its smooth all the way through. and if i shut her off for 15 min or more its fine-until i hit wot again. any one got any ideas?

maybe something is sticking in the carb. check the linkage maybe its hanging up on something or the accl pump is sticking. just some ideas.
08-09-2009 12:45 AM
85_Olds
intermitent high idle

Ok reak quick heres the deal: new intake manafold-car ran ok, but problems starting, rebuilt the carb, car starts fing, but idles high only after it goes to wot. i can drive all day at heavy part throttle and it stays at a good idle, but as soon as i push it to wot the idle jumps way up, and its like i can feel it in the gas pedal when i floor it-its smooth all the way through till right before it hits the floor board. its like pushing a toothpick through a watermellon. but only the first time, after i do it, the idle jumps and its smooth all the way through. and if i shut her off for 15 min or more its fine-until i hit wot again. any one got any ideas?

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 03:02 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.