|08-14-2009 07:13 PM|
So as you go along in life, buy what you can, when you can, because you will need it on down the road. Now all you have to do is start shopping for that 96" Snap-On tool box.
|08-14-2009 10:25 AM|
|bobjob||once you get into the business ,, you never are done buying tools.. they get addicting ..you buy more every 2-3 weeks....even if you don't need them..... ...|
|08-14-2009 10:25 AM|
Plus he will have a VERY nice set of "hobby" tools!
|08-14-2009 09:11 AM|
|08-14-2009 01:07 AM|
They will pay for them self later..Remember...If your not spending money,Your not making money..When I first open my fitness club,I had to spend so much money every month to make it grow.. I saw a lot gone out, But there was even more coming in.. So always remember,You have to spend some to make some..Good luck with your college.It will all pay off in the long run..You will see,And you will look back at what you said here in laugh..
|08-13-2009 11:11 PM|
I second both of those suggestions especially the pry bars, some guys might tend to choke up at the Snap-On price for that set but they ARE worth every penny when the going gets tough! I know you said you are spent out now but in the future when you need to increase your set things like those pry bars are a good example of an item that it pays to spend the extra money on to get the best. Also that awl and hook set is unbelievably handy and should be in everyone's box.
|08-13-2009 09:27 PM|
|old fords||I will get more specalized tools as things go along and money allows. Right now I am out of cash. I might have $10 in change lol.|
|08-13-2009 09:20 PM|
Looks like a good start i was in your position a couple of years ago. Another thing to check into is most of the "pro" tools (mac snap on matco) offer a vo-tech discount. I'm not suggesting going overboard with that but what I did if I needed a particular tool, I tried to buy it from one of the above 3.
A couple of suggested additions.
These don't look like much but are great for lining up the holes in covers
This set of prybars or atleast one of this type.
You will find so many uses for these, from yanking electronic injectors to pulling out seals.
Good luck to you. You won't regret it. And don't limit yourself to just trucks work on anything you can get your hands on at school. I started in diesel, ended up in stand by generators. But one thing is for sure my toolbox collection has grown considerably since school.
|08-13-2009 01:09 PM|
|old fords||the school will supply the specialty tools|
|08-13-2009 12:58 PM|
I don't see a diesel timing meter or diesel compression gauge though, is that supplied for your classes?
//I only point them out because when I started fooling around with the 6.2's these were the first things I had to have in order to see what was going on with the motor.
|08-13-2009 12:31 PM|
got my tools for diesel mechanics = goodbye life savings
Today me and dad went and bought the tools for my diesel mechanics program. They ended up costing $1225. Here is what I got
Cougar 1/4 inch socket set sae
Cougar 1/4 inch socket set metric
cougar 3/8 socket set sae
cougar 3/8 socket set metric
cougar 1/2 socket set sae
cougar 1/2 socket set metric
wright tool 6 piece screwdriver set
wright tools hack saw
otc 18inch jimmy bar
4 sets of elkind hex keys
3 piece channellock pliers set
wright metric and standard nutdriver sets
ball peen hammer
wright metric and standard combination wrenches
3 piece wright adjustable wrench set
mayhew punch set
new tape measure
irwin 5 piece vise grips set
robin air ac gauges
es automotive multitester
It took all my savings plus $300 to get. I have been saving and am glad to finally get them so I can start college next week