Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Interior> carpet binding
User Name
Password
lost password?   |   register now

Thread: carpet binding Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
12-19-2009 08:23 AM
esty
Quote:
Originally Posted by jdss
I'm getting ready to try some carpet binding myself.What size thread and needle did you use on these? They look great
i use whatever needles are available at walmart and coats & clark upholstery thread, T26, size 69...
12-16-2009 09:13 AM
DanTwoLakes You can use a size 18 to 24 needle and size 69 to size 138 thread. I prefer size 22 needle and size 92 polyester thread, but those are just personal preferences.
12-14-2009 03:08 PM
jdss
Quote:
Originally Posted by esty
This is my 1st post in this forum but I read the interior section daily….about 4 months ago I bought a cheap Brother LX-3125 sewing machine at walmart for under $70.00 & started making carpet kits for BMW 2002’s…so far I’ve made, sold & ship’d 136 sets….

I don’t have any problems sewing with my cheap machine…I don’t have a walking foot or any other attachments…I buy marine vinyl at the local fabric store and generally find everything I need in the remnants section for $3.00 a yard…I cut it into strips, use a small bead of hot glue to fasten it upside down to the face of the carpet so it doesn’t move when I’m sewing it then sew it to the carpet…


Then I fold the vinyl over the edge of the carpet and hot glue it to the back of the carpet…I was concerned about the glue releasing but I made a set for myself this way over a year ago and have not had any problems…one would have to tear the carpet and vinyl in order to separate the two materials










Just thought I’d share
I'm getting ready to try some carpet binding myself.What size thread and needle did you use on these? They look great
09-05-2009 09:12 AM
DanTwoLakes Right below the "reply to thread" box is another box called "additional options" go to the "attach files" section and click on "manage attachments" this will open up an area that allows you to post 5 pictures. Click on "browse" and you will be able to go to your files on your computer and choose a picture.

These pictures must be re-sized to less than 300KB, or they won't upload. You must re-size the pictures with whatever software came with your camera before you try to upload them.

You can also download your pictures to places like Photobucket and insert pictures directly into a message using the link icon at the top of the message box.
09-05-2009 07:15 AM
benchracer1 I am slightly in the curled region. A little more practice and I do believe I will have it. On another subject, how do you post pics?
09-05-2009 06:49 AM
DanTwoLakes If the binding is vinyl, that's not too much. It's too much when you curl the corners or mis-shape the carpet.
09-04-2009 10:39 PM
benchracer1 Apparently Im sytretching the binding a bit. I start with a 2 foot peice of carpet and a 2 foot peice of binding and end up with an extra 1/2 or 3/4 inch of binding after they are sewed together. Now that I am aware of this I will attempt to not have that happen. I guess this is the practice you speak of...........Steve
09-04-2009 02:15 PM
DanTwoLakes There isn't any magic trick to doing it, it's more practice than anything, but you need to be making relief cuts on the part of the binding that goes underneath when you go around a corner or an inside curve. Also, you just want the vinyl to lay down, you don't want it to stretch very much at all.
09-04-2009 12:32 PM
benchracer1 I actually figured out that I can get the topstitch look buy using the ditch method and sewing about 1/8 to 1/4 in inside the ditch. My big challenge is getting the corners to lay flat. For whatever reason i am either stretching the vinyl or not leaving slack. Any tips?
09-02-2009 05:09 PM
benchracer1 That was kinda what I thought. I have done a couple of ok stitches but I will probably stick to the ditch method. I have been attempting to use loop style carpet and therein probably lies the problem.
09-02-2009 01:23 PM
DanTwoLakes You really can't do the topstitch method very well if you're trying to do it on carpet with any kind of a nap to it. The carpet needs to be pretty flat to do it that way. The only way to get it to look decent would be to trim the carpet down low around the edge of the carpet.
09-02-2009 01:17 PM
benchracer1 The ditch method I can do ok. When topstitching I am continually walking right off the edge or bunching up the binding under the foot resulting in a crease or pucker. I have tried sewing both sides at once as well as stitching it to the back then topstitching, Any ideas for me to try?
04-30-2009 12:14 PM
esty
Quote:
Originally Posted by DanTwoLakes
My suggestion is to seam the ends of the binding of those two pieces instead of overlapping the binding, that's all.
i misunderstood the 1st post...i understand now...i could but i've never had any complaints and the area on the 2 rear pieces that is overlap'd also is under the seat so any fancy stitching would be lost anyway..

if i ever make mats that show completely, that's how i would do it or try to do it

thanks for the feedback
04-30-2009 06:44 AM
DanTwoLakes I wasn't talking about going all the way around on all the pieces. I realize that all those bare edges are hidden after they are installed. I was only talking about the two pieces that you already are going completely around. My suggestion is to seam the ends of the binding of those two pieces instead of overlapping the binding, that's all.
04-29-2009 07:15 PM
esty
Quote:
Originally Posted by DanTwoLakes
They look very nice, but I have a suggestion for you. On the floor mats, you have to sew completely around the entire perimeter. It would look more professional to seam it than to overlap it. Just leave 4 or 5 inches of binding loose when you start, and when you near the end, overlap the pieces of binding 1 inch, sew a 1/2" seam, and then finish binding the carpet. Check out this thread, and you'll see what I mean: CLICK HERE
i patterned these from 3 other retailers sets and none are bound on all edges...the front floor pieces that are not bound on the end get covered by the front of the rear piece and that's under the seat...

other 'naked' edges are covered with the car's existing pinch welt trim and rocker trim when installed...even the original sets installed at the factory in the 60's & 70's wasn't trim'd on all edges
This thread has more than 15 replies. Click here to review the whole thread.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 08:35 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.