|10-09-2009 09:24 PM|
How about switching the whole thing? (steering box and pitman arm). I swaped mine for 25 bucks in my 88 f/bird from a "pull it yer self" yard.
I switched from a standard to a quick ratio (gm sport steering) I got out of a camaro. (Both F body's).
|10-09-2009 06:43 PM|
Another thing most don't realize is the steering boxes between the S-series trucks and the A/G body cars are interchangeable, not including pitman arms.
Lots of the Malibu and Monte Carlo drag racers swap the power units out for the manual units for both weight and issues with clearance for big block swaps.
|10-09-2009 04:46 PM|
There should be a bunch of 78-88 G-body's in the salvage yard.
Chevy Monte Carlo, Malibu, El Camino/GMC Sprint
Pontiac Grand Prix, Le Mans
|10-09-2009 11:48 AM|
|M&M CUSTOM||The pitman arms from the A/G body GM cars are the same from 1978 to 1988, except for 1 difference, the manual box as compared to the power steering, but this I am not sure of.|
|10-09-2009 11:23 AM|
Thanks for your input guys..to answer your questions...yes it is on the drivers side and it is the hole that conects to the rest of the steering linkage that has been streched and now has slack and give in it. i looked at the splines and tried to find another one from another year and some were close but i dont want to buy it and find that it curves at a sligthly different angle...you know shopping online with pics only . i talked to others in my class with a bit more knowledge and they said pitman arms are easy to find...and they are ..but not for my car.
|10-08-2009 08:45 PM|
I needed one for a mustang box I purchased and found a NOS on eBay. You might want to try that route. Do your research first. You will have to know the diameter of the shaft and the number of splines. Also the shape is of a concern. You have to know what you need before buying.
Hope this helps.
|10-08-2009 03:17 PM|
|sqzbox||What's wrong with it? Did he say why you needed a new one? Which side of the carlo did you take it off of?|
|10-08-2009 02:59 PM|
I don't know
I am in school right now to be an auto tech and my teacher (with 30+ years in the business) tells me i need a pitman arm to correct my steering problems but everybody else says i don't... thanks for your help
|10-08-2009 10:52 AM|
|RPM||Are you sure you are hunting the right part. The pitman arm is a non wear item. It is the arm that bolts to the steering box. Now the arm on the passenger side is called an idler arm and they are bad about wearing out|
|10-08-2009 10:26 AM|
I have been searching every jobber in north america looking for a pitman arm and no one has one they say it is a non wearing part and it shouldnt need to replaced unless you are in a front end collision....well guess what 5 years ago my car was in a front end collison the body was fixed and now you cant tell but my steering has become very sloppy and i need to replace it I found a another 83 monte carlo in a scrap yard and took his but it was worse than mine!!! what can I do????