|11-15-2012 09:50 PM|
|11-15-2012 09:47 PM|
caprice rear end
|10-19-2009 08:37 PM|
Learn how to tell the difference between 7.5" and 8.5". GM didn't seem to have any set rules on what car/engine combo got what rear end or what wheel bolt pattern. I suspect a hi-po model would get the 8.5" for sure, but some of the mid-sized turbo Buicks from the '80s got 7.5" units, so who knows for sure.
Last year I junked a couple of Buicks that illustrate my point. One was a big old '82 Park Avenue that had a 307 Olds motor, a 7.5" rear end, and the 5-on-5" wheel bolt pattern. The other was a slightly smaller '84 LeSabre, also with a 307, but it had an 8.5" rear and the 5-on-4.75" bolt pattern.
|10-18-2009 12:44 PM|
|87box||Okay Thanks For The Good Replies, Was A Big Help.|
|10-12-2009 06:39 PM|
|hemi joe||what size motor you have?if it's not a 350ci more than likely it's a 10 bolt 7.5.|
|10-12-2009 05:26 PM|
if it has 9c6 or 9c1 on the sticker glue to the trunk lid then it will be 8.5"
also would have larger brakes and 5 on 5" wheel bolt pattern like the trucks and station wagons
|10-12-2009 01:53 AM|
|jimfulco||http://novaresource.org/axle.htm has pics that will help you see if it's an 8.5" or a 7.5" rear.|
|10-10-2009 08:16 AM|
|SSedan64||7.5" 10 Bolt.|
|10-09-2009 11:22 PM|
1987 Caprice rear end
i want to change gears in my rear end but i dont know what inch rear end i have in my 87 caprice.