|11-07-2009 08:50 AM|
The larger of the two master cylinders reservoirs always goes to disk brakes which are usually on the front of the vehicle. Disk brake calipers require a greater quantity of fluid than drum brake cylinders.
|11-07-2009 08:09 AM|
|maninacoupe||thanks guys, in further looking I found out. Large reservoir side goes to the front. Feel like I should have known this but,didn't. Thanks again|
|11-06-2009 08:15 PM|
Please diregard my previous post.
I was generalizing, and this is too important of an issue for that.
|11-06-2009 08:13 PM|
|alittle1||First port from mounting bolt goes to front cylinder, second port goes to rear cylinders, generally.|
|11-06-2009 07:51 PM|
master cylinder plumbing
Help me out. This may look like a stupid question but, here goes. How do you distinguish which port is which on a master cylinder ( front and rear)? I got a #mc39027 master cylinder (1976 to 1980 Chevy Monza m/c) to go under my 34 Ford. I need to go to a 7/8 bore master cylinder to achieve better braking. And I don't want to plumb it wrong.