Ok,one of my projects is a 87' ex. cab s10 pickup. For this rig I want to build a custom dash insert to house a set of gauges salvaged from another vehicle.
What I need to figure out is what would be the most effective,logical way to build this out of fiberglass ? I have already taken some thin chipboard and made the rough shape of what I am after for the base. This will have to be a 2 peace deal,a base that mounts directly to the dash support ,and a secondary panel,or "skin" that will clip into the base after the gauges are mounted. I have provided a couple pictures so you'll can hopefully see where I am going with this.
What I need to figure out is what would be the most effective,logical way to build this out of fiberglass ? I have already taken some thin chipboard and made the rough shape of what I am after for the base. This will have to be a 2 peace deal,a base that mounts directly to the dash support ,and a secondary panel,or "skin" that will clip into the base after the gauges are mounted. I have provided a couple pictures so you'll can hopefully see where I am going with this.