|12-15-2009 01:35 PM|
|lg1969||I install an electric fan on 34 ford that had a 350sbc. All you have to do is go to a local auto parts store and pick a thermostat switch and install it on the intake manifold. Wire it the a radioshack 30amp automotive relay. It turn on at 180 and turn off at 175.|
|12-15-2009 01:10 PM|
Dual stage temp switch
Thanx so much Brimstone.
That made my day. Exactly the info i was looking for.
|12-15-2009 11:02 AM|
Here's a thread that might help you out: http://www.hotrodders.com/forum/2-sp...ch-131375.html
He's using an OEM switch from some type of Volkswagen that can handle 2 different fans/temps. It looks like one of the configurations will get you close to your temp requirements, but I don't know which model of VW to look at for the switch.
|12-14-2009 12:51 PM|
Thanx for the links.
I was wondering if anyone knew of an oem gm style switch at the lower temp i wanted (185 turn on)I know fuel injected vehicles run at higher temps. I wanted an oem switch in case it ever failed, replacement would be easy at any local auto store.
Anyway i will probably just end up running dual switches and relays. My fan is a 2 speed.
Switch 2 (185 turn on)
Switch 1 (195 turn on)
|12-14-2009 10:43 AM|
You can get the whole kit here:
Or just the switch here:
|12-12-2009 10:18 AM|
Fan Control Switch
Im converting to electric cooling fans on my 1974 350 sbc corvette.
I already them wired and relayed. Can someone advise me on a fan switch I can use and what temp thermostat to use. I would like to install the switch in the cylinder head. and 185 degree turn on. Im looking for a common switch in case i ever need a replacement on the road.