Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic -- Hot Rod Forum

Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Suspension - Brakes - Steering> hard pedel slow stop
User Name
lost password?   |   register now

Thread: hard pedel slow stop Reply to Thread
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Please select your insurance company (Optional)


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Additional Options
Miscellaneous Options

Topic Review (Newest First)
12-22-2009 08:09 AM
sqzbox RED The car was a 1971 Javelin with vacuum wipers that ran off the double dia. fuel pump! Can you believe that?
If it sprinkled at the drive in, I had to start my car to wipe the windsheild.
12-22-2009 05:53 AM
red65mustang sqz,

my suggestion is for you to do some reading in the "knowledge base" link at the top of the page...

mega cam/low idle Hg = they make a electric vacuum pump system to feed the booster so the booster never sees less than 18Hg....
(if you don't want to blip the throttle in P/N to charge the booster)

your canister "fix" cure proved the whole brakes system needed close inspection...
12-21-2009 06:09 PM
sqzbox I'm guessing you have a stock converter? That "bliping" the gas and slipping into "N" get's old real fast. I had a Crower 3/4 cam at 280D/460L with stock stall converter and if I wasn't in nutral or decelerating, the brakes wre nill.
A vacuum resivour can, fixed that for me. I could have got a higher stall converter and raised my idle speed but the cool "LOPE" of the cam wouldn't have been as profound at 1200 rpm. Besides that, My milage would have sucked as I ran 3:54:1 rears and made monthly 1000mi trips to San Diego from AZ. I still got 16-17 mpg and ran 14's at the track, and several win's at autocrossing. The biggest problem before the resivour was at low speed or at idle when parking. After the first stab on the brakes, the assist went away. Needles to say I've bumped into two cars and lucky me, happened to be friends and not much damage. The thing that was the worst was the "freak out factor" when you stand on them with both feet and it keeps rolling!
12-21-2009 01:34 PM
red65mustang the booster stores 3-5 brakes applications typically by means of a one way check valve where the hose connects....

to have pb with a big cam just blip the throttle once in park/neutral so the booster receives a 18hg+ plus charge as the motor rpms decelerates back to idle...

every/anytime you back off the go pedal the Hg shoots to 25+ stored in the booster...
a good condition booster will store that vacuum charge overnight....

all that adding a canister/reservoir does is increase the volume to be charged,,,doesn't increase the Hg which is critical for the booster to operate
12-21-2009 01:17 PM
Originally Posted by sqzbox
And now, the rest of the story!!!! BIG CAM, LITTLE VACUUM. That explains everything.
Sounds like a vacuum reservoir will be in your future.
lol probably is getting better thought
12-20-2009 07:26 PM
sqzbox And now, the rest of the story!!!! BIG CAM, LITTLE VACUUM. That explains everything.
Sounds like a vacuum resivour will be in your future.
12-20-2009 02:47 PM
campracing thanks guys i will check the booster

the truck came with disc/drum

i think it was a vacuum problem i just put the motor back in and the timming was way off so big cam little vacuum no brake assist
12-20-2009 07:50 AM
pepi Apply pressure to the brake pedal and start the motor. The peddle should move down a bit indicating that the booster is working . Check the MPB site they have some very good accurate troubleshooting methods.

One other item do you have a disk too drum proportional valve in there? If that ruck had disk, 4 wheels The new rear has drums then the proportional valve hanging under that MC needs to be changed ....
12-20-2009 05:22 AM
sqzbox Have you adj. the rear shoe's? clearance is critical on rear drum and front disc
combinations. Too much clearance between the rear shoes and the drum will make the front disc's work harder with less stopping power. That might be your problem as if you need to use both feet on the brake peddle to stop.
You can check your power brake booster by starting your engine and shutting it off then pop the vacuum fitting off the booster. If it doesn't have a wooshing sound, your loosing brake assist from the booster because of a bad diaphragm causing a vacuum leak. This will also cause erratic idle problems but will still run smooth going down the road.
12-19-2009 10:53 PM
pepi If they are power brakes sounds like no assist .. check the booster operation
12-19-2009 08:26 PM
hard pedel slow stop

ok here is the story i have replaced the two front calipers pads hoses rotors and MC. then i swaped the rear end from a 69 chevy truck in to the 81 chevy truck the rear still has drums on it. after bleeding all the air out now the pedal is hard to push and the truck does not want to stop

any ideas

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -6. The time now is 08:24 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999 - 2012. All Rights Reserved.