|02-10-2010 10:14 PM|
|02-10-2010 09:57 PM|
|Coodeville||Thanks for answering the question. Before I read your response, I took a good look at it and did just that. It works fine now. I was a real pain doing it by hand.|
|02-10-2010 07:49 PM|
If you slip the bobbin onto the shaft and it sort of spins on there (not enough friction) you can spread the shaft with a screw driver. Mine loosened up on me after winding a few bobbins so I had to spread my a bit. Works good now.
Is that you problem or does it appear to be something else?
|02-10-2010 02:38 PM|
Bobbin Winder on 111W?
Im following the book but the bobbin will not grab. Is it poosible I was given the wrong winder? Photo's will follow