|02-13-2013 10:39 AM|
Located a guy just outside of Raleigh.
He is renovating an old barn for his shop and should be ready to go in a couple of weeks.
PM me for more info.
|02-13-2013 10:28 AM|
It's good there's no bracing in the way, otherwise you just cut it out and weld it back in.
Didn't find any in NC with a quick search, just the normal-type fab shops that you probably wouldn't walk into with an old car hood. Me I'd ask a hot rod shop if they knew anyone, if nobody here does.
|02-12-2013 08:19 PM|
Since I saw this threads about louvers I wanted to throw out a question.
I have a old truck... hood is just a sheet of factory bent metal. (what I am trying to say is it doesn't have all the cross bracing like today's cars do)
I am going to cut louvers in my pickup hood to help with heat issues.
Will this weaken the hood, strengthen the hood, or make no difference.
I assume the number of louvers and location will have some effect also..??
|02-11-2013 07:00 AM|
Let me know if you find someone.
I have a hood that needs doing too.
|05-26-2010 06:54 AM|
|04-22-2010 08:35 AM|
If you don't mind having the hood cut up a bit, these are much easier to install, and much cheaper than having them stamped into the hood.
|04-19-2010 11:37 AM|
Anyone know of a shop in NC (preferably in or close to Raleigh that can stamp louvers ?
Looking for something along these lines or close to this: