Hot Rod Forum banner

how to take the front sheet metal off a 59 chevy pickup?

3K views 13 replies 5 participants last post by  armygreeneg 
#1 ·
i know you can take all the front sheet metal off in one piece i have taken the hood off and the front bumper the 2 bolts on the fender that go to the cowl the hood hinges and the 2 bolts under the radiator but i still wont come off what bolts am i missing and help would be great
 
#2 ·
Hi, not sure if the cowl bolts you mentioned are the ones that you access from inside the cab in the kick panel area. My 56 ford, has 3 of these bolts on each side. Also, did you unbolt the inner fenders? I believe they have separate bolts to the cowl as well as to the fender....good luck, let us know if you get it off...
James
 
#9 ·
yeah its starting somewhere i got the motor out now and pick up a 350 and a 700r4... and today went to the summit scratch and dent sale and got a complete 18 circuit harness for 175 bucks can beat that so im getting some stuff together going to start on the camaro front sub frame hopefully this weekend
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top