|06-06-2010 10:58 PM|
I have read that the old charcoal goes bad & don't work.
I threw my original away 20 some years ago.
|06-06-2010 02:58 PM|
New EEC Charcoal Canister Plumbing?
I'm putting a NEW EEC charcoal canister on my 72 Monte Carlo.
It's for a FORD & only has 2 ports. I can blow in either port & the air comes out the other port easily. No labels as to in or out, so I don't think it will matter.
The original gas/vapor separator above the front of my new gas tank is plumbed up properly to the 3 ports on the gas tank.
The new fuel vapor line runs up to the engine compartment & is on one port of the new charcoal canister.
Now my question is where to plumb the canister out line?
I have been given advice to Tee it into my PCV line, but wouldn't that apply full intake manifold vacuum to my gas tank & possibly interfere with my fuel pump?
I'm thinking of plumbing it into the bottom of my air cleaner in-board of the filter element???