|06-08-2010 06:35 PM|
Well guys thanks for the nice options. I will have to look around some more then decide. On tall valve covers are they all pretty much the same tall height wise? Reason I ask is because my engine is in a chevy s10 with tall valve covers and anthing taller then what I got would be too much but I do have some but very little room left. I have to use tall ones cause of full aluminum rocker arms. Thanks guys
|06-08-2010 06:31 PM|
|Sinister||Those are the short ones. They sell tall ones as well. You'd have to ask the seller if the tall ones clear roller rockers.|
|06-08-2010 06:14 PM|
I love the look of finned valve-covers. Those are some good looking covers will they clear the aftermarket rockers ?
|06-08-2010 06:07 PM|
|Sinister||I got these off of Fleabay for right around $80. They have good baffles. Search finned valve covers there:|
|06-08-2010 06:05 PM|
|Fast 4 Door||
oops, that was just the pic try the link below . . .
Got some pulleys from these guys, pretty nice.. $ 60 valve covers
|06-08-2010 04:03 PM|
Here check some of these out. http://www.rjays.com/Billet_Spec/bil...-covers-01.htm .
|06-08-2010 03:20 PM|
Need some advice on new set of aluminum valve covers for sbc
Hello guys I am looking into replacing my jegs chrome covers on my 350 sbc with a set of cast aluminum ones tall style but I want ones with good baffles that will keep my pcv valve from wanting to suck up oil. Does anyone have advice on a set that would be good but does not cost more then 80 bucks? I don't have a fortune right now to get something expensive and I feel I should have to pay over a hundred dollars plus for nice set. I was looking at these summit ones.
Would those ones be a nice set? They do come with baffles and all I have to do is install them. I have what seems like good baffles in my jegs ones and they are all enclosed and they angle down like a slope with a hole at the bottom so oil that would get up in there can drain out. Anyhow hope people who have chevys and I know a lot does could offer some good suggestions and what would be a good set.