|06-16-2010 05:53 PM|
Not to promote anything, but for all my previous domestic cars, I ordered front-end parts from PST.
On all my previous toyota pickups (4 of them), I'd get the cheapy Rockauto stuff.
Everythings been good so far.
P.S. lol at "edelbroke"
|06-16-2010 05:24 PM|
It's not bling in my case, it's function.
My front is pretty low with springs 50% stiffer than stock, Bilstein shocks.
I will start doing my own alignments as I bought the tools from SC&C when I got his Stage 2 adjustable UCA's & tall ball joints
The sleeves & end nuts are easier.
|06-16-2010 12:42 AM|
I'm frustrated with Edelbroke
Seem that they can't get this part correct.
I ordered their: Tie Rod Sleeve Pair 5252 from Summit. (they work like a turnbuckle, outer-end RH thread & nut, inner-end LH thread & nut)
First set comes, one sleeve had NO THREADS in one end, 3 RH nuts & 1 LH nut.
Summit gladly exchanged for second set.
Second set comes, sleeves are fine, BUT 4 RH nuts, NO LH nuts
I called Edelbroke, explained that I needed 1 more LH nut, They sent me ANOTHER RH NUT!!!!
I gave up & ordered Hotchkis tie rod sleeves.