Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Engine> relubing cam from lifter valley
User Name
Password
lost password?   |   register now

Thread: relubing cam from lifter valley Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
07-09-2010 07:17 AM
curtis73 Just FYI... prelubing things by spinning the pump does absolutely nothing for the lobes. All you'll be doing is oiling the cam bearings and upper valvetrain. Cam lobes get absolutely no oil from pressurized sources - only from crank splash. You can spin the pump all day and not lube the lobes.
07-09-2010 01:14 AM
327NUT If you have the int. manif. off then by all means pour some cam break-in or oil down through there...but as DV said still pre-lube the engine just before you fire it.
07-08-2010 10:59 PM
candrive55 will be using comp came break in additive and red lube for cam any other thoughts on lubing cam from valley??
07-08-2010 08:28 PM
sqzbox If your not sure what oil has ZDDP in it, Valvoline racing oil has it. I get mine from Napa.
07-08-2010 08:03 PM
DoubleVision Sure you can relube it, it certainly won`t hurt but still prime it with a oil pump primer and drill right before you fire it up.
07-08-2010 07:18 PM
candrive55 So your saying not to try and relube it?
07-08-2010 06:57 PM
DoubleVision Instead of doing so I recommend priming it when she`s ready to fire off. Make sure you use oil that has ZDDP and some STP oil treatment, also make sure the oil filter is prefilled. Prime on it until it has oil coming out of the rockers. After it fires do the normal break in routine of 20 minutes and vary the RPM from 1800 to 2200.
07-08-2010 06:48 PM
candrive55
relubing cam from lifter valley

Do you see any problem with running the cam lube down the holes beside the lifters.(not the lifter holes) Dont want to do the lash if i dont have to.

Motor was rebuilt two years ago and never fired up. sbc
some lube still there from rebuild

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 08:51 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.