|07-13-2010 04:47 PM|
|cool rockin daddy||Need to add one thing. Powdered metal rods are forged rods. Just a different material being shaped by forging.|
|07-13-2010 11:11 AM|
I wouldn't trust a damned thing they did, or sold me, personally.
Take your "bent" rods and run!
|07-13-2010 10:59 AM|
|sickolds||well i got the rods checked to see if they were straight and they were all crooked and i told the guy to give me new ones he said he could straighten them for me i said hell no i want another set at first he said no but after a lil one on one he gave in that the last time i go there now i hope there as good as people say|
|07-13-2010 12:25 AM|
Powder metal rods
I really like the GM PM rods. I have purchased them used for as little at $50.00 a set. No issues and used them in two engines. Much better quality and weight match than standard forged rods. AAA+++.
|07-12-2010 09:46 PM|
|BOBCRMAN@aol.com||His guy must be the village idiot. Takes a lot to break a rod removing pistons... any rod...|
|07-12-2010 09:38 PM|
|sickolds||one more thing when i took them to a shop to remove the pistons the guy said that his guy broke one and he gave me another one how in the hell did he brake it|
|07-12-2010 09:31 PM|
|DoubleVision||The cash for clunkers wasn`t a good idea when you add up what they did to those that got traded in. They would pour sodium silicate in the crank case and run it til it locked up. Sodium silicate is liquid glass. Rods don`t have any oil passages, so they should be fine to reuse. Vortec heads that had the same treatment done to them have been used. However, I would have the rods checked.|
|07-12-2010 09:26 PM|
|sickolds||they might be good but probably not the ones i got because i got them from a cars for clunkers suv look at youtube (cars for clunkers rod out the block)|
|07-12-2010 09:22 PM|
|sickolds||now there is one more thing to ad to my worries go to youtube and look up cars for clunkers now i dont think i am going to use then|
|07-12-2010 09:20 PM|
|cool rockin daddy||
Hmmmm, GM put them in the LS2 engine and warranties them for 100,000 miles.
Link to story on how good PM rods are:
International Navistar was usED PM con rods in 7.3 liter Power Stroke DIESEL!
The "fabulous" Chevy "pink" rod was a production rod that had been magnufluxed. Maybe shotpeened.
What is your worry?
|07-12-2010 09:09 PM|
|DoubleVision||I like them. I`ve run them in several high performance street/track builds and haven`t had a problem. One day at my machinists he had a bunch of small block 350`s laying around that he had gotten from the bus shop. One was a late 90`s out of a GMC pickup. We tore it down and found the crank was broken in half, but the PM rods didn`t have a scratch. My best friend bought the rods and we used`em. His engine now has about 25,000 miles, some of those miles are hard with held high revs. No problems of yet. On a future build in a play mud truck where RPM`s will be held high for good periods of time we fully plan to use PM rods. In the past I`ve seen stuff that was made out of powdered metal and it was crap, I think we call it "pot metal" where the curing process must have been very poor as it broke so easy. However, GM seemed to do there homework on curing it properly because they have a nice smooth appearance and look great. In many cases I`ve seen them shot with nitrous and a piston gave up before the PM rods did. Now I`m not going to say they work miracles or there perfect, I`m only saying from what I`ve seen from first hand experience. I have a fresh set of baby LT1 PM rods that are 5.940 that I plan to use in a future 327 build.|
|07-12-2010 09:05 PM|
|sickolds||well they looked good and stronger then i got home searched the web and read some not so good things and some very good things dont know what to believe|
|07-12-2010 09:01 PM|
|sickolds||the only reason i want to use them is because of my tight budget at first i was going to build another s bc 383 but money is tight|
|07-12-2010 09:01 PM|
My opinion is w/good bolts they are as good as any production SBC rod out there.
Did you get yours before researching them?
|07-12-2010 08:57 PM|
|sickolds||thats what i hear but at the same time i hear bad things about them|
|This thread has more than 15 replies. Click here to review the whole thread.|