|07-25-2010 08:09 PM|
|sqzbox||WHAAAAAT! Take a sawzall to a Z hood? Shame on you Tech.|
|07-25-2010 06:35 PM|
Hood??? We don't need no stinkin' hood. Take a Sawzall to it. Make room.
You could also use a drop-base air filter assembly, but make certain that the lid of the assembly doesn't smother the top of the carb.
|07-25-2010 06:03 PM|
|sqzbox||If you get the 4" cowl you might as well add a 1" spacer under the carb and add a little more HP for cheap.|
|07-25-2010 05:05 PM|
|gofastz||i have the performer eps rite now, and my engine dynoed on the desk top @ 357hp and 406tq, we did the intake swap to the performer rpm and it made 60 more hp! so i was wondering if my hood will clear on ether of the ones that i mentioned?....Hell i may look into a 4" cowl hood....|
|07-25-2010 03:35 PM|
|bigdog7373||As long as you don't get a high rise intake you'll be fine. I have a holley contender high rise manifold on my 350 in a 78 firebird and it doesn't fit. Still haven't decided what i'm going to do with it. But yea, get a low rise and you're good.|
|07-25-2010 12:49 PM|
|gofastz||sorry, the car is a 79' z/28 (pics)!!|
|07-25-2010 12:38 PM|
Hood clearance on a intake swap??
im going to be doing a intake swap soon, and im wanting the rpm air-gap or the reg performer rpm and was wondering if i would have hood clearance issues with ether of those intakes???thanx 4 future feed back guys!