|08-04-2010 12:18 PM|
|PRO 48 fleetline||
Best pistons on the market.
There are some other good ones, JE etc. but mahles are an awesome piston have forged ones in my 406.
Most nascar engines are all stuffed with them.
|08-04-2010 06:26 AM|
I had bookmarked the Truarc site from a previous thread on lifter clip replacement, good of a time as any to post it:
|08-04-2010 05:31 AM|
I first became familiar with mahle on big german diesels I work on,very,very reliable and tolerances very close from piston to piston.
I started using them in my hotrod motors and have exellent luck with them,you can also call mahle and talk to a tech that is extremely knowlegable on this piston,avdvise on ring gap etc,I just wish they had double truac pin retainers from the factory,I like to use truac double ,flat to flat and that I know of thats not offered any more,just takes less time and in my opinion is a better way,but they are exellent pistons to say the least!!!!
|08-04-2010 05:11 AM|
|BOBCRMAN@aol.com||Excellent stuff.. Mahle is the manufacturer if "Clevite 77" bearings also..|
|08-03-2010 11:19 PM|
|SSedan64||I agree, they're a fine example of "you get what you pay for". Very good quality.|
|08-03-2010 12:56 PM|
|Jsup||Nothing wrong with the Mahle. I'm running them in mine.|
|08-03-2010 12:47 PM|
|CNC BLOCKS NE||
|08-03-2010 12:43 PM|
In my opinion, they are one of the best pistons out there for the money.
|08-03-2010 12:11 PM|
Are Mahle powerpak pistons any good? this is the part number being considered -SBC250030F05-, or am i better off with a set of forged KB pistons, this is for an NA motor nothing to crazy, this is im getting a really good deal on the Mahles if i buy them.