|08-18-2010 02:53 PM|
|08-18-2010 01:38 PM|
|65malibuSS||the pistons are flat top, 2-valve relief, the bore is 4.030 and stroke is 3.48, and 65cc|
|08-18-2010 10:35 AM|
Which Head Gaskets?
i just wanna get some opinions on what head gaskets i should get,
the motor is a 350 bored .30 over (355cid), aluminum heads, 10.5:1 compression, naturally aspirated motor
i wanna keep it right at 10.5:1, part numbers or suggestions would be awesome thanks!