|11-29-2012 06:44 AM|
|marko69||Yes, unfortunately, the newest seat of this type is over 20 years old, I usually get them in a little beat up. Biggest problem I have is that the foam gets so distorted with every seat I can't use one pattern, I always have to spend a lot of time adjusting the pieces. The top of the headrest and the bolsters are always a bear to get right.|
|11-29-2012 04:42 AM|
|stumpy1972uk1||They look good mark , i dont like doing porka seats . To finicky and often the foams and listings over here are rotten due to sunroof leaks.|
|11-28-2012 05:30 PM|
Hey, how about those 944 seats?
That's all I do are 944/911 seats, I'm curious to see what yours looks like.
Took me literally years in my spare time to get it right.
|11-16-2012 06:03 PM|
|Coodeville||Beautiful job, Stumpy!|
|11-16-2012 09:16 AM|
|stumpy1972uk1||Hi guys , its been a while since ive been on here , been running the upholstery business alongside my daytime job. Updated my website Mid England Retrims . Recently retrimmed a nice hotrod , had a glide dearborn seat in it, cant buy the foams over here so had to build the foams to suit. Ade|
|04-20-2012 05:01 AM|
|stumpy1972uk1||Cheers guys ,|
|04-07-2012 07:20 PM|
|nine4gmc||that looks great, work is slow everywhere. stick with it and you will get more "word of mouth" business.|
|04-07-2012 06:59 PM|
|04-07-2012 05:21 PM|
|stumpy1972uk1||Hi guys , been a while since I posted on here , had six months of being self employed doing the auto trimming , things are hard over here in the UK so I've gone back to my day job as a refrigeration engineer. I've just completed my first hot rod , its a 32. got the rag top to do next , are there any plans available that show how patterns and cutting etc. Cheers Ade|
|01-22-2012 07:58 AM|
my website is www.superstitch-custom-interiors.co.uk . theres a gallery on there with links to forums ive posted pics on . hope this is ok. cheers ade
|01-22-2012 07:56 AM|
cutting the pattern into the foam allows deeper pleats to be done , similar to ron mangus`s way he did it on the grey seats for a chevy think it was.
when i mentioned setting the piping , i ment , getting the piping to line up and look smooth and uniform on the finished seat by pulling the cover into place .
chose a good quality vinyl and the seats will last even as a daily driver.
|01-17-2012 01:00 AM|
Re: used my new trimmers table today pics attached
thanks for post u did good job......
|01-12-2012 10:12 AM|
|DanTwoLakes||No, you don't need to cut the sew foam at all. Glue the vinyl to the sew foam, mark out whatever lines you are going to sew, and then sew the lines in. You'll need to have a pattern for the parts you are going to sew the diamonds on.|
|01-12-2012 09:58 AM|
|danios||One last question, looks like you are marking out your patterns on the foam. Are you doing that, gluing the vinyl on, and then sewing foam side up (facing the needle)?|
|01-12-2012 09:51 AM|
Have to say, your work is amazing! Definitely convinced me to add diamond pleats to my project.
Perhaps a dumb question but are you cutting the foam first or simply sewing straight into it like Don Taylor's book? I've noticed that some people seem to cut the pattern into the foam first, wondering if that makes it last longer as this will be going into my daily driver.
Also, one of your threads mentioned "setting the piping." I was wondering what you meant by that. How are you getting it to line up just so?
Thanks and once again very impressive work. Hoping my adventures come out similar.
|This thread has more than 15 replies. Click here to review the whole thread.|