|01-19-2011 07:55 AM|
|01-18-2011 03:41 PM|
Go to www.v8monza.com, all the info you seek is there. The S-10 swap requires you to use the S-10 spindle, a '75-up Vega/Monza lower ball joint, and a set of the tapered ball joint stud adapters sold at V8Monza.
Your other choice is to look for '75-up Monza spindles and brakes, these have a better vented rotor and better caliper, but are still 4 bolt wheel pattern. Getting pretty hard to find in usable shape however.
The S-10 swap is really the most economical way to get 5 bolt wheels and better brakes and is pretty easy to do.
|01-18-2011 03:27 PM|
Click on the "Select your vehicle" button on the left side of the page and a new window will open that allows you to select the part (rotors, calipers, drums, etc) and year/make/model. The resulting list will provide links to images of the parts.
|01-18-2011 03:18 PM|
hello joe - where do you find the dimension charts that you have posted. it would be nice to be able to access them when trying to cobble something together. thanks! brian
|01-18-2011 01:55 PM|
|01-18-2011 01:12 PM|
rotor change ?
I'd worry more about the caliper hook up than the bearings, get the spindle outside measurement and the inside rotor measurement and check with a bearing co. for bearings. Are the rotors the sme dia. ? if so you maybe in luck. lol
|01-18-2011 09:34 AM|
Of course, the even more obvious problem is that the caliper mounts are integral to the spindle and the S-10 rotors are larger than the Vega rotors, so there's no way to move the calipers to fit.
|01-18-2011 09:17 AM|
I have a '74 Vega, does anyone know if the rotors from S-10 fit a Vega? Or do you need the spindles and disc brakes from the S-10? Thank You