|01-22-2011 11:20 PM|
|68NovaSS||What Big said. You can install them and be able to tell it if will at least rotate OK out of the housing.|
|01-22-2011 09:32 PM|
|big gear head||Give it a try. All you have to loose is some time.|
|01-22-2011 08:59 PM|
|db flyer||Thanks Poncho that is exactly what I bought, it is supposedly from a 59 Impala. I am missing the 2 spider gears from the cross pin. Do you or anyone else know if my 2 spider gears will work in there? By my measurements it looks like they will. Thanks|
|01-22-2011 08:30 PM|
This is not a 56 rear, but gives you the idea
|01-22-2011 08:25 PM|
|poncho62||2 spider gears are missing|
|01-22-2011 08:18 PM|
|db flyer||the pinion and ring gear are in place but the center section on has 2 gears on end of axles.|
|01-22-2011 08:05 PM|
|big gear head||There should be at least 4 gears inside the differential. If the axle gears are the only thing in it then the pinion gears are missing. Probably broke and didn't get replaced.|
|01-22-2011 07:56 PM|
|db flyer||1`ll see if i can put on a pic, but i wonder why there is not 2 gears on the shaft between the gears that are on ends of axles. i know this is dumb on my part, but the gears on end of axles right now are floating and looks to me that they will hit the center pin?|
|01-22-2011 07:11 PM|
i'm guessing it would be easier if you post a pic of what you got, and we'll let you know if we see anything missing.
what do you think is not there?
|01-22-2011 06:32 PM|
56 chev. rear end gear picture?
can someone pull up a picture of 3rd mimber showings the gears in including pinion and assc. gears non positraction for my 56 chev. I purchased a used 3rd member and think something is missing. Hope I`m wrong. Thanks