|02-15-2011 10:26 PM|
I have built a lot of engines over the past 50 years and I can tell you if it was me I would opt for a solid roller. Something with a 106 CL 268 degrees
of duration. Like the man said those cams are a cash cow. Use a cam that works. Check all your figures Car weight, gear,tire size and horsepower before you buy a stick.
|02-15-2011 10:16 PM|
|southshore30||What did you do Double Vision? Just degree that cam a little? I had been thinking about the Thumper for the SBC in my Jeep but have been doing research and not too fond of it now.|
|02-11-2011 05:16 PM|
Those cams are really for those that don`t know how to make a basic high performance cam lope at idle so really it`s nothing more than a sales pitch cam that costs power. My friends cutlass has a Vortec 350 and we installed a Comp .218 duration @.050 cam. It says "Noticeable idle" and it does, it idles with a really nice lope and it doesn`t cause any power loss.
I played with timing figures for a long time when I learned how to make them lope. That same friend of mine purchased a chevy truck not long ago with a build 350. The thing ran decent,, if that`s the word for it. Anyways, it`s got a set of headers, 882 junk heads, a edelbrock intake and carb. When he got it, it idled smooth, he was told it had a lopey cam in it, but it didn`t sound like it. The thing was completely gutless on power. So he brought it to me and left it a few days. I did some work on it and when I took it back to him it had a nice lopey idle. The guy he bought it from came by and heard it run and wanted to buy it back on the spot. He asked me "How did you make it lope?" and all I said was "Nothing to it"
|02-11-2011 02:10 PM|
|FastOrange||i installed my Mutha Thumpr straight up, I was impressed with it at first, but now i realize that the cam is so wacked that im probably loosing power.|
|02-11-2011 12:35 PM|
I agree w/installing it SU. The cam specs are so 'wacky' on that Thumper cam anyway, w/107 LSA and a 14° duration @ 0.050" split favoring the exhaust, etc., that there'd be no real point to changing the phasing, IMHO.
How has it been running so far?
|02-11-2011 12:19 PM|
Yeah Cobalt327 it's for the Buick/Monte carlo and its in the mail .
|02-11-2011 09:01 AM|
|cobalt327||Is this for the Buick 350/Monte Carlo?|
|02-11-2011 08:46 AM|
|68NovaSS||Unless they're looking for a specific power band, most DIY folks will install a cam straight up.|
|02-11-2011 07:56 AM|
Thumpr Cam Question
[B]I have a question for my hotrodder friends out there . Can I install my Thumpr 279 cam straight-up since its for cruising and a little mash on it every once in a while let me know please !