|07-06-2014 07:20 AM|
. Actually, you never gave enough details for anyone to suggest a better cam... that 230/230 is about the same as your 227/233...
. This thread is 3 years old, but just wondered what ever happened?
|02-18-2011 12:41 AM|
|FastOrange||Thanks, Were is this post you made about big cams and timing? i couldn't find it.|
|02-17-2011 05:46 PM|
Question, is a 850DP Holley too big for this. all i have are 650's and a lonely 850.
|02-17-2011 09:48 AM|
|02-17-2011 09:47 AM|
|02-17-2011 03:22 AM|
Hey ive used lunatis Bracket master series And they are great!
Tis one http://www.lunatipower.com/Product.aspx?id=2411 is probably a god choice fore your engine! Send a e mail to Lunati to confirm Wat CR the Cam Requires! your gearing and stall is Hi enough
okey its the same cam as you mentioned!
|02-17-2011 01:10 AM|
Need help choosing a cam. (350 SBC)
hi guys, need your help, i should have done this the first time, but i didnt and ended up going for the Comp Mutha Thumpr, which i now realize is a MISTAKE!
anyways, im looking for a cam that is .480 lift (I did get away with the .489 lift, but its damn close) or under cause of my vortec's and is Flat Tappet.
Engine is in a 1994 C1500, Regular cab, short box, currently a Weekend Warrior type of deal, going to be drag racing it this year.
1988 TBI 350, Stock Bottom End, 4-Bolt Main.
1997 Vortec 906 Heads
Comp Valve Springs, Retainers, Locks (Need to upgrade to beehives to run higher lift.)
Edelbrock RPM Performer
1" Open Spacer
Holley 670CFM Street Avenger
MSD StreetFire with upgraded MSD Coil and MSD Module
Taylor 8mm Spiro Pros
NGK TR55 Plugs
Cloyes Double Roller Chain
Any Ideas guys?
Im currently looking at a Lunati 292 Bracket Master II.