|03-18-2011 01:58 AM|
I know a shop that selling upgraded unit but you might spend lots of money. If you are willing, PM me. I'll point the shop. keep in touch
|03-06-2011 04:04 PM|
|Ohio-Dan||I to, have delt with CK Performance. Nothing but good things to say about them..........Dan|
|03-06-2011 02:54 PM|
|bigtank05||you will also have to get a 200 r4 crossmember too. the stock 350 one will not work.|
|03-04-2011 06:28 PM|
Chris @CK can be difficult to get a hold of by Ph. sometimes, busy,busy. He's "Chris718" on TurboBuick.com forum.
Another very good & busy shop is Lonnie @ExtremeAutomatics.com "Quickt" on TB.com http://www.extremeautomatics.com/ not as close to you, Ohio.
Also Dave Husek, ID is same as name on TB.com easiest to get in touch with.
Great Builder list here>> http://www.turbobuick.com/forums/tra...y-who-who.html
|03-04-2011 06:00 PM|
|03-04-2011 11:09 AM|
|Screemincheetawheely||Thanks guys, I'll scope them out.|
|03-04-2011 10:24 AM|
Perhaps the "best of the best" is not all that far from you, CK Performance. Give Chris a call and he'll work with you...
|03-04-2011 09:57 AM|
RPM Performance in Indiana. Hands down a great shop to deal with.
If I was you, Id lurk on the GN forums. It takes a different mindset and materials to build a purpose built 200-4r or 700r4/4L60. A lot of rebuild shops try to use a TH350 approach it seems and there are lots of unsatisfied customers looking for performance OD boxes.
|03-04-2011 09:08 AM|
rebuilt 2004r sources
Hi, I'm converting my 83 monte from the th350 to a 200r4. I was looking for some input on a good place to buy a rebuilt and upgraded unit from a reputable buillder.
I've looked at tci, bowtie, maddog. Need more to choose from to make up my mind.