|08-15-2003 11:42 PM|
Thanks Dinger. Dear ol' Dad used to lay awake at night worrying about cracks in his concrete. He spent the last 15 years of his career working for a landscape architect doing exposed aggregate patios, pool decks and trick winding step jobs. Most of them either had redwood or brick strips. He was a real genius at his craft, even at 75 years old he could teach the average young buck a thing or two with a trowel and edger.
I built my little shop back in 79. I helped him set up the slab but the Old Man poured it and finished it under a vis-queen tent in the rain by himself, while I was at work. It was a Birthday present. Dad's 87 now, and the garage floor will undoubtedly out last him. If it's any consolation prize, there ain't crack one in it yet. When I finally retire, it'll be easy to let this house go in favor of more space. It'll be hard to part with this little 20-24 garage.
|08-15-2003 08:20 PM|
|dinger||Prime mover's dad is right. Concrete for testing is poured into round containers. set into water kept at about 42o, 1 week testing as x number of crushing lbs, 28 days for maximun allowed for the test. Mist the concrete, never allow it to "rain" down on the slab. Most jobs I've seen call for cuts every ten ft. or 100 sq. feet. depending on your compaction though, concrete will crack where it dam well wants to..Dan|
|08-15-2003 12:27 PM|
|08-15-2003 06:23 AM|
Did you put a hand print in it or write your name or something?
|08-15-2003 05:35 AM|
Senor...After it is poured and set up you can't keep it too wet. As Primemovers dad stated the perfect cure would be 99 years underwater. The slower it cures the tougher the concrete is. You ever see them pour a sea wall? Put the forms in the water, back the truck or barge up to the forms and pour away. Concrete sea walls last for years and years without deterioration. The best thing you could do is dampen it down and cover it with plastic for awhile, but for the most part just wash it off once or twice a day will do the job. The biggest thing with concrete is make sure you get the expansion joints sawed in to control cracking. Now a SAFETY LESSON...ALWAYS wash off concrete if it gets splashed on you. I was pouring footers for my first garage by myself and the guy running the concrete truck told me to be sure to keep it washed off or I could get concrete poisoning. Never heard of it. I worked around concrete with my dad for years and never had a problem. On concrete guy in town was known as the barefoot concreter. He never heard of it. Well...I got it. When I was pouring the footers, I was down in the concrete. It came up over the top of my boots a couple of times but I didn't think it was anything to be concerned about. I finished up pulled my boots off and my ankles were a little red. Just about like a mild sunburn. I took a shower, washed them off, and they looked a little redder. They were starting to hurt a little so I layed down on the couch. This was on a Sat. By Sun. they were really painful but I figured it would go away with a little ointment on them and some Tylenol. By Monday I couldn't get my shoes on, feet swollen up about 4 times their normal size, couldn't walk at all, and severe pain. Made it to the doctor. He stated do not go back home, go straight to the hospital. I was on antibiotic IV's for 5 days straight, physical therapy for 2 weeks after that to keep the circulation moving, and off work for 2 months. Huge scars on my ankles from the chemical burns and discoloration of the skin. It is something I never ever would want to go thru again. So if ever messing with concrete, use safety precautions and make sure you keep it washed off.
|08-15-2003 12:28 AM|
Hopefully I will experience the "New Garage Smell" soon too! hehehe
Is there a such thing as keeping the new floor TOO WET as it cures?
|08-14-2003 11:53 PM|
How about posting us some pics. I bet you are looking forward to the next one also!! Congrats. Nothing better than a new garage.
|08-14-2003 10:01 PM|
On the plus side the wife and I are buying an acreage so I will get to do this again. I am planning a 40 by 60 auto shop and a 20 by 30 wood shop.
I was also planning to build a smaller auto shop so I did not have to heat so much in the winter. I spent $300+ per month last winter just keeping the house warm.
I did not use mesh opting instead for 10MM rebar at 18 inch intervals. I assume it should be strong enough for the cars I own.
|08-14-2003 08:28 PM|
My Dad was a cement finisher for 46 years. He always said the perfect cure for concrete is 99 years under water. I think that's overkill. On a six inch slab with wire mesh, I'd keep it wet for a week before I drove onto it. If you can scuff it with your shoe, it's still green - be carful for a few days, it'll cure.
|08-14-2003 07:24 PM|
1 week and wash it off everyday or twice a day if the sun hits it. Keeping it moist lets the concrete cure better. Make sure you have control joints sawed into the concrete also. It will crack so you want control joints so the cracks will follow them instead of going all over the place. How many times have you been out walking around on it trying it on for size?
|08-14-2003 06:20 PM|
|edog1||I would give it about a week before driving and a little longer before any major usage. Keep it wet as long you can some people will also place old carpet or burlap on top of the slab and soak it down.|
|08-14-2003 04:59 PM|
do what Malc sed
keep it moist for a day or two, it'll cure better and harder....
i can't tell you why, but when i did concrete work, we always kept it wet.....
|08-14-2003 04:55 PM|
|BstMech||Sounds like you got a pretty good start on the garage with a slab like that.|
|08-14-2003 03:30 PM|
|email@example.com||A week would be plenty. The 28 day number comes from the fact that concrete reaches its maximum strengh in that time. It is the spec for critical structures like bridges, & buildings. For a parking slab, especially one that is 6" thick - normal is 4", adequate strength is reached in a couple of days.|
|08-14-2003 03:19 PM|
If you sprinkle water on it until it sets it will set harder.
Concrete will set underwater, the reaction in it setting causes heat and if you cool it you can prevent cracking.
|This thread has more than 15 replies. Click here to review the whole thread.|