|04-13-2011 06:32 PM|
|bsa_bob||GOOD IDEA---------cause i'm fresh out of them. That is an idea that hadn't crossed my mind. A template .....yes thanks a lot silver shadow. can bend it up-hand it to the yard man. and say go get one like this .Alright!! bob s|
|04-13-2011 05:33 PM|
Your best bet might be to bend up something yourself from a bit of scrap, and use that as a model.
Then go scrounging around the auto graveyards looking for something a similar shape.
That will be a lot easier than making and comparing a bunch of inch measurements with every bar you see.
If you can find something off a reasonably late model car that will fit, you may be able to buy aftermarket bars in a range of different stiffness to play around with.
You might be surprised what you can come up with. Something perfect is already out there, you just need to find it......
|04-13-2011 12:18 PM|
|bsa_bob||bump bump bump|
|04-08-2011 03:24 PM|
rear swaybar for 50 merc.
Do you know of one that might fit?Or have one? please let me know thank you bob s