Hot Rod Forum banner

Aluminum Heads ????

2K views 14 replies 13 participants last post by  lg1969 
#1 ·
I have a 70 Vette that needs a valve job. I have decided to just replace the old double humpers with a fresh set of aluminum heads but there are so many out there
I will be running a half lift solid tappet cam
Can anyone suggest the best set for me and what cc should I be looking for
It is a weekend car seldom driven
Thanks
 
#4 ·
Everyone seems to be raving over the Air Flow Research heads..... But they are expensive. You will be paying as much for a set as all the non chevy guys have been paying for their heads for years :D

You'll need to tell everyone about your setup in greater detail before they will be able to really be specific though
 
#6 ·
#12 ·
Bubber said:
I have a 70 Vette that needs a valve job. I have decided to just replace the old double humpers with a fresh set of aluminum heads but there are so many out there
I will be running a half lift solid tappet cam
Can anyone suggest the best set for me and what cc should I be looking for
It is a weekend car seldom driven
Thanks
In the off chance the engine is original, hang on to the part$ you remove.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top