|05-30-2011 06:00 PM|
Pretty much what I figured...
Gonna have to get under and take a better look..'
|05-30-2011 05:57 PM|
the connector should be in a vertical position on the drivers side of the case, behind the shift linkage, roughly half way up the case.
dang, treed... lol
|05-30-2011 05:54 PM|
All 700r4 - 4L60 trans came with electrical hook up. On the shift linkage side, above the linkage and towards the rear of the trans case about 5-6 inches
Some one may have modified the trans for non electrical lock up controlled converter or to a non lock up configuration
|05-30-2011 05:06 PM|
Well I didnt include any of that as in this case it will not help....
Engine/trans is in a 82 Jaguar xjs
Was said to come from a 84 z-28
Engine numbers come back to a 84 firebird
Engine harness color codes dont match jaguar, camaro, or firebird
has a transpan matching a 700r4
so..... was a 700r4 made without a electrical connection?
|05-30-2011 04:58 PM|
or if possible, post a pic of the pan and we can identify it that way.
|05-30-2011 02:31 PM|
700 R4 without electric
Is there a 700R4 that dosnt have a electrical connection?
Far as I can tell the one In my car dosnot have any electrical connection whatsoever......
I know where it is supposed to be but cant find it there...