|06-12-2011 01:41 PM|
I just finished swapping emails with Barry re compatability of SPI Universal Clear with a water based 100% Acrylic Base Coat (it is - with a little common sense), and it is SUNDAY!!
Try THAT with some of the other guys!!
|06-12-2011 10:40 AM|
OK,I'm in ....SPI universal clear over Blk chroma base...Before cut & buff..
Lot car...SPI again over RED Nason ful base..no cut & buff....and they say Nason cant be blended..
I started using SPI about seven yrs ago because of the price.since then I've tried most of thier products,they all preform well at a good price but thier clear and epoxy primer stand head and shoulders above the rest at ANY price...Theres only a few companies that have earned this amount of praise but of them SPI is at the top and I havent even gotten into thier service at all ...even if the clear and epoxy was just average the sales and service alone is enough to have me hooked.....
|06-11-2011 06:45 PM|
|mr4speed||Here are a few more|
|06-11-2011 06:42 PM|
|mr4speed||Here are some pics of the cad and one of the 55 chevy|
|06-11-2011 02:13 PM|
|bighotroddin||Checked out the website definitly worth getting some. I am about a 1/2 from Milwaukee but will call the company to see if anyone one carries it.|
|06-11-2011 08:52 AM|
If your on the west side of wi there's a guy in mn that ships to you. Name is auto parts city.
|06-11-2011 07:53 AM|
Visit their website: http://www.southernpolyurethanes.com/
|06-10-2011 09:06 PM|
Where can you get the SPI clear at and whats the price?
I have been usinf Acme Finish 1 clear made by Sherwin Williams for a while now since Finish master stopped selling Smart brand clear. Workes great for the used cars. On the other stuff I use Deltron DC 4000.
|06-08-2011 06:28 PM|
get those factory gun air pressure settings out of your head. no 2 clears spray the same. i'm at about 28-30 on my w400.
just a side note, w400 is my main clear gun but on that vette i did use my lph400 1.4 because the w took a dump on me at that particular time. They both lay the clear great, just the w400 is faster and fits my style better.
|06-08-2011 05:45 PM|
|06-08-2011 10:06 AM|
|06-08-2011 05:32 AM|
Most HVLP's work better with a little higher PSI.
I'm starting to think the mfg recommended pressure is more for
enviromental reasons than spray quality.
|06-07-2011 11:22 PM|
|mitmaks||You adjust gun to work for YOU not the other way around|
|06-07-2011 10:39 PM|
|67Elcamino||Im not an expert and do not have much experience shooting clears. Im just wondering if I need more PSI. I noticed that when I use the PSI setting recommended by the gun it barely shoots paint. When I increase the psi a bit seems to work fine. Will this PSI effect the finish and create orange peel in the clear. I noticed by watching some videos of people shooting clear its shoots very misty. Maybe Im laying too thick.. Im going to test and adjust my gun before starting next time. I just purchases a gun with 1.4 tip|
|06-07-2011 06:26 PM|
|chas350||sounds like your gun may need a good cleaning?|
|This thread has more than 15 replies. Click here to review the whole thread.|