|06-20-2011 09:47 PM|
thanks for the replies. i measured everything and found what i hope i will need at honest charlie's speed shop. i called them today (helluva decent guy on the phone) and ordered all the weird stuff and hope it will work.
6 to 8 inch adjustable wiper arms
9 inch wiper blades
2 universal motors with built in switches.
considering what i've been thru, i might take some pictures and post them here. i've seen guys with studebaker trucks, as well as a very few internationals that have fixed them up, so maybe a resource for us with "oddball" equipment might could use the info.
wife and i went to D.C. last year for vacation, and are thinking about niagara falls in a couple of weeks. this time i want to go with working wipers and a new seal around the crank out winshield (a blessing with no a/c).
|06-20-2011 09:36 PM|
|86GMC||might be able to make something work with boat wiper motors|
|06-20-2011 06:13 AM|
Try these guys . They don't specifically list one for a '46, but do show '50-'56.
My bet is that if they don't show a specific version, there's one that could fit. Then there are these folks which are what I'm using on my '31. Simple and compact tho I did have to resolder a joint on mine, appear to be well made.
|06-19-2011 11:39 PM|
If you are looking to mount the wiper motors in the stock location then look at what some of the early ford guys do as those mount over the windshield as well..
|06-19-2011 09:10 PM|
wiper motors for a 47 international
i have a 47 international kb-2. it has no wiper motors, and i have no hardware for them. i bought a universal type motor that wouldn't work, and can't find the extremely short wiper arms and blades the truck will need.
any idea where i can get the parts to put them all together? need motors, arms and blades.
if possible, i would prefer to buy my parts from a supplier who supports this website.
thanks in advance!