|06-24-2011 06:43 AM|
The above response is a good suggestion, a replacement would give the best results.
To repair the plastic so it can't be seen would be difficult.
|06-23-2011 08:49 PM|
|MRTS33||Try over at Team Chevelle. Check the want-ads over there. They have a world of Chevelleness.|
|06-23-2011 12:54 PM|
|alittle1||I would go with a little JB Weld in the hole, add some plastic or masking tape for backing the hole if it is larger than a pencil eraser, and because the dash is textured, I would dab it with a shop towel (rag) just as it was tacking up. Smooth it down with 100 - 220 grit when dry, using just a corner of the paper and then paint with SEM black trim paint after giving the area a wash with vinyl prep.|
|06-23-2011 11:24 AM|
|race_jr||it's plastic right next to the steering colume 71 chevelle|
|06-23-2011 11:05 AM|
|1ownerT||Can you supply any additional info? What part of the dash, is it metal, plastic, is it the pad, etc.|
|06-23-2011 07:30 AM|
|race_jr||Hello first time here need info if some one can i have a hole in my dash from a guage and want to fix it is there a good way to do this where it won't be able to see it to much THANKS [/QUOTE]|
|06-22-2011 10:57 AM|
71 chevelle dash repaiere
Hell first time here need info if some one can i have a hole in my dash from a guage and want to fix it is there a good way to do this where it won't be able to see it to much THANKS