|07-01-2011 08:18 PM|
|deadbodyman||I'd find a paint shaker and give em a good shaking...it'll all be settled at the bottom and very hard to mix with a stick,maybe a paint mixer that chucks up to a drill...if the hardener has ever been opened it'll be all dryed up by now and need to be replaced but both parts of the etch primer should be good to go.|
|07-01-2011 01:58 PM|
Only way to know for sure is to mix up a small batch and test it.
|07-01-2011 12:11 PM|
|oldschool hero||Thanks for the responses. I have a few gallions of primer ,one self etching and one urathane that I want to use on my car hauler.It's two years old, just didn't want to screw up my paint gun.|
|07-01-2011 06:54 AM|
|deadbodyman||I wouldnt use it on anything I really cared about but I pulled some 10 yr old paint (base) off the shelf and didnt have any trouble,it was a little thick so I added extra reducer..As long as its sealed up tight and theres no crust on top it should be ok. This was for the kid next doors bike (freebee) ...|
|06-30-2011 10:04 PM|
If they are kept in a controlled environment where the temp is near 70 degrees I would say about two years in a sealed container.
|06-30-2011 10:02 AM|
Is there a shelf life for automotive paints and primers?
I'm not talking any specific brands or types, just in general.